Easy to use at present, there are two kinds of stainless steel hydraulic transition joints on the market. One is soft, the other one is hard. Either way, they are all small size, light in weight. So convenient to install and operate faster, let users better Experience the effect. The sealing of the low cost in order 38 tube fitting to guarantee some transition joints need additional welding, stainless steel hydraulic transition joints do not need to welding. This can help users save installation time, cost and cost, make the maintenance of late Easy.
Hydraulic transition joints are common in our daily life, especially the adjustable three rectangular transition joints, belongs to a kind of hydraulic transition joints, can adjust the direction, so in life's excavator and wheel loader, elevators and other heavy machinery hydraulic system often can see, but this kind of hydraulic fittings are very test installation technology, once errors are easy to cause joint damage.
The hydraulic transition joint portion of a lock nut. First of all, we should rotate to the left, until it reaches the main gasket, and then in the same steps on the o-ring, but will they rotate to the left. Install the hydraulic transition joints to install oil head, but it is important to note that wrenches should not be used in this step, and must be used with the hand, and in the later stage of adjustment. This step is to use a wrench, nut to be fixed. Because need fastening nut, so using a wrench, using the torque cannot under relevant provisions when there are parts in the hydraulic transition joints, we step before completion, fixed nut with a wrench, pay attention to the connection body can't rotate together, or even no complete installation steps, subsequent use will also have a bad effect, so must use wrench or something similar to fixed connection body.
When installing hydraulic transition joints must be in strict accordance with the above steps, otherwise it is easy to cause deformation of joint gasket, unable to maintain its sealing performance. Only the correct installation method, our hydraulic transition joints can play its role, with a normal life. Have more advantages than ordinary stainless steel pipe joint. It is a kind of there is no tools can quickly remove the pipe joint has a compact structure, small volume, light weight, high pressure, good interchangeability characteristics. This kind of pipe connection light clean, widely used in aviation, metallurgy, mining, forging, coal, oil, ships, machine tools, chemical equipment and pipeline system of all kinds of agricultural machinery, can quickly into the power, completely safe, efficient, without leakage. Especially suitable for the need to remove the pipe often.
Working pressure: 1650000 mpa, the temperature in - 54 to + 180 ℃ between working medium: gasoline, heavy oil, kerosene, hydraulic oil, fuel oil, frozen oil, water, salt water, acid, alkali, gas, etc.
Seal: nitrile butadiene rubber, fluorine rubber, silicone. Don't used to the flow of the liquid. Shall not exceed the maximum working pressure. Use temperature range shall not exceed, lest cause sealing material wear or leak. Do not artificially collision, bend or stretch in order to avoid damage. Don't mix with metal powder or dust, in order to avoid abnormal operation or leakage. Attachment brass tube fitting leads to abnormal working or leakage. Stainless steel joint is more convenient than ordinary joint quickly, improve the joint flexibility, practicality and safety, easy to maintain. Fast connection can removal and connection process, one-handed operation button operation is simple. General connection is a difficult one-handed disassembly process, even need tools to complete.
6 Blog posts